Connecting To A Power Source - Edge-Core ECS4610-24F Installation Manual

MASTER CONTRACT: 176914 (LR 99150)
REPORT: 2296506
_______________________________________________________________________________________ PROJECT: 2296506
| Installing the Switch
C 3
HAPTER

Connecting to a Power Source

SFP transceivers are hot-swappable. The switch does not need to
N :
OTE
be powered off before installing or removing a transceiver. However,
always first disconnect the network cable before removing a
transceiver.
SFP transceivers are not provided in the switch package.
N :
OTE
C
ONNECTING TO A
To connect a switch to a power source:
Insert the power cable plug directly into the AC socket located at the back of
1.
the switch.
Figure 13: Power Socket
Plug the other end of the cable into a grounded, 3-pin, AC power source.
2.
P S
OWER OURCE
– 44 –
Instruction Manual 1 ( 15 of 16)