Philips SFF 6135hfd User Manual page 75

Easylink
The Easylink function offers you additional options for
managing external devices that are connected to the
same telephone line as your device (starting fax recep-
tion, taking over the line, see Additional Devices). To
use this function, additional telephones must be set to
tone dialling (DTMF tones).
ECM
Error Correction Mode
Encoding
The data of your fax transmission are encoded and
compressed for the transmission. The minimum stand-
ard is MH (Modified Huffmann). Better encoding meth-
ods are MR (Modified Read) or MMR (Modified
Modified Read).
Error Correction Mode (ECM)
The ECM method reduces transmission errors that re-
sult, for example, from bad telephone lines, thereby re-
ducing the duration of transmissions. Both of the
connected fax machines must support ECM.
Fax Groups
Fax machines are classified in terms of internationally
standardised fax groups based on their transfer type and
speed. Connections between two devices of different
groups is possible; the lowest common transfer rate is
selected. The determination of the speed takes place
during the handshake (see Handshake). Fax groups 1 to
3 are analogue fax machines. Nowadays, groups 1 and 2
are hardly to be found any longer; fax machines of group
3—which have a transfer speed that ranges from 9,600
to 33,600¦bps—are currently most standard. Group 4
fax machines are digital devices that function exclusively
on ISDN systems. They have a maximum transfer speed
of 64,000¦bps.
Fax Polling
With active fax polling, one can retrieve a document
from another fax machine. For fax polling from a larger
company offering several polling services, you can also
enter sub-addresses / direct-dial numbers. In order to
do this, you must insert a dialling pause between the fax
number and the sub-address (see Dialling Pause).
Fax Signal, CNG Tone (= Calling Signal)
The tone that a fax machine sends out to announce a fax
transmission. When the CNG tone occurs, the fax
switch of the device recognises an incoming fax call and
starts the fax reception.
Fax Switch
The fax switch checks incoming telephone calls and con-
trols the ringing behaviour of the fax machine. Accord-
ing to the selected mode, fax transmissions will be
received either automatically or manually.
Glossary
Flash Key (R-key)
With the flash key, you can make use of additional tele-
phone services if these special functions are enabled for
your telephone line. The R key has replaced the hook-
flash function. (see Call Waiting, Call-toggling).
Handshake
The handshake is the initial and final phase of a fax trans-
mission. After establishing of the connection, fax ma-
chines check the group affiliation and features such as
size compression or grey tones. After the fax transmis-
sion has been completed and before the connection is
terminated, the receiving device confirms receipt of the
transmission (see Fax Groups).
Hook-Flash Function
See Flash Key
ISDN
Integrated Services Digital Network
ITU
International Telecommunications Union (UN organisa-
tion)
LCD
Liquid Crystal Display
Memory
If there is no paper or toner in your device, the device
will store incoming fax transmissions in its memory.
MH
Modified Huffmann (encoding process for faxes, see En-
coding)
MMR
Modified Modified Read (encoding process for faxes,
see Encoding)
MR
Modified Read (encoding process for faxes, see Encod-
ing)
Outside Line Access Code
The outside line access code is the number or letter
that must be dialled before the actual telephone number
on a telephone of a private branch exchange in order to
establish a connection to the public telephone network
(see Private Branch Exchange).
PABX/PBX
Private Automatic Branch Exchange
Polling
see Fax Polling
POTS
Plain Old Telephone Service
EN
75