Telephone Lines And Additional; Switching Caller Line Identification (Clip); Selecting The Dialling Process; Set Up The Public Switch Telephone Network - Philips SFF 6135hfd User Manual

14 Telephone Lines and Additional Devices
Telephone Lines and Additional Devices
Switching Caller Line
EN
Identification (CLIP) On/Off
· Switching Caller Line Identification (CLIP) On/Off
Function is not supported in all countries and networks
(Function is not supported in all countries and
networks)
CLIP Definition
The number of an incoming call appears on the display.
For this function to work, the Calling Line Identification
Presentation (CLIP) must be activated for your tele-
phone line. Enquire with your telephone company. Call-
er Line Identification may be associated with a fee.
Setting the Country Correctly
Setting the Country Correctly
If the Caller Line Identification does not work
even though the function is activated for your
telephone line, check if you have set the correct
country (see also chapter Selecting the Country,
page 51).
1. Press C, 057 and OK.
2. Use [ to select whether you would like to turn
the function on or off.
3. Confirm with OK.
Selecting the Dialling
Process
· Selecting the Dialling Process
Function is not supported in all countries and networks
(Function is not supported in all countries and
networks)
In some countries you can set the dialling mode to pulse
dialling or tone dialling (DTMF tones).

Selecting the Dialling Process

Selecting the Dialling Process
Only use pulse dialling if tone dialling is not yet
activated for your telephone line.
1. Press C, 053 and OK.
2. Use [ to select the desired dialling process.
3. Confirm with OK.
Set up the Public Switch
Telephone Network (PSTN)
· Set up the Public Switch Telephone Network (PSTN)
Function is not supported in all countries and networks
(Function is not supported in all countries and
networks)
Public Switch Telephone Network (PSTN)
Public Switch Telephone Network

(PSTN)

You can use this function to set your device to
connect to the Public Switch Telephone Net-
work (PSTN) (see also chapter Set up Private
Branch Exchange (PABX), page 58).
Set up the Public Switch Telephone Network (PSTN)
58
Your device is automatically adjusted to the telephone
network if you set the country correctly (see also chap-
ter Selecting the Country, page 51). It is possible that fur-
ther settings are required for the Public Switched
Telephone Network (PSTN). Ask your retailer or the
technical customer service department.
1. Press C, 032 and OK.
2. Select the desired setting using [.
3. Confirm with OK.
Enter the dialing code
Introduction
You can enter a dialing code for the connection to a tel-
ecommunications provider or a network, for example.
This number will be placed automatically before every
number that you dial.
1. Press C, 0522 and OK.
2. Enter the telephone number. This number will be
placed automatically before every number that you
dial.
3. Confirm with OK.
Set up Private Branch
Exchange (PABX)
· Set up Private Branch Exchange (PABX)
PABX Systems
Private branch exchanges (PABX) are typical in many of-
fices and some households. You must dial an outside
line access code in order to get a connection to the
public telephone network (PSTN) from a PABX.
Additional Telephone No Extension
Additional Telephone No Extension
An additional telephone connected to the de-
vice on a telephone socket is not considered an
extension.

Set up Private Branch Exchange (PABX)

You can set up your device for operation on an exten-
sion, indicate the length of the internal numbers (direct
dial number) and save the code which must be selected
in order to reach the Public Switched Telephone Net-
work (PSTN) (= outside line access code).
Outside Line Access Code is Automatically Dialled
Outside Line Access Code is
Automatically Dialled
Once these settings are in place, you will no
longer need to prefix the outside line access
code every time you enter an external number.
The device will automatically add the outside
line access code in front of numbers that are the
same length or longer than the configured di-
rect dial numbers.
Set the connection type
1. Press C, 051 and OK.
2. Use [ to set whether you operate your device on
an extension.
3. Confirm with OK.
Philips · LaserMFD 6135hfd