8. Attach the water bottle holder
8.1
Fix the water bottle holder to the front post and
secure, using two machine screws.
8.2
Slide the water bottle into the water bottle holder
in position directly as shown.
Final check
•
Your bike is now assembled. Please make the following final checks before you use it for the first time.
•
Make sure all screws / bolts are tightened.
•
Make sure you have positioned it on a flat, level surface.
Power up
1.
Plug one end of power cable into the bike as shown.
2.
Plug the other end into a suitable AC outlet (220 - 20 volt, 50Hz)
A
CHALLENGER Omega X-Trainer | OWNER'S MANUAL • 11
B