York Fitness CHALLENGER Omega X-Trainer Owner's Manual page 7

Assembly Instructions
5. Attach the handle bar posts
5.1 Insert the handle bar pivot rod through the pivot
rod bushes fitted on the handle bar bracket
carefully as shown.
NOTE: Ensure that the middle wire does not get
trapped when you insert the pivot rod.
5.2 Attach the right handle bar onto the handle bar
pivot rod carefully. Connect the hand pulse sensor
wire socket, which protrudes from the pivot rod
bush on handle bar, to the middle wire plug
protruding from the end of the handle bar bracket
securely.
NOTE: Ensure wires do not get trapped when
fitting handlebar.
5. Slide the rest of the wires into the bush on the
handle bar bracket carefully.
NOTE: Ensure wires do not get trapped when
fitting handle bar.
5. Secure the right handle bar post to the handle bar
bracket by using one allen head bolt, spring washer
and washer.
5.5 Slide the right low handle bar post into the right
handle bar post and secure in position with the
adjusting knob.
5.6 Attach the left handle bar onto the handle bar
pivot rod carefully. Connect the hand pulse sensor
wire plug, which protrudes from the pivot rod
bush on the handle bar, to the middle wire socket
protruding form the end of the handle bar bracket
securely.
NOTE: Ask somebody to hold the right
handlebar in position until Steps H and I have
been completed.
5.7 Slide the rest of the wires into the bush on the
handle bar bracket carefully.
5.8 Secure the left handle bar post to the handle bar
bracket by using one allen head bolt, spring washer
and washer.
NOTE: Hold the right side allen head bolt
in place using an allen key, whilst you are
tightening the left side allen head bolt, to
ensure both bolts are fully tightened.
5.9 Slide the left low handle bar post into the left
handle bar post and secure in position with the
adjusting knob.
NOTE: Make sure you fasten both bolts
securely for your safety and comfort when
pedalling. Make sure you fix both low handle
bars in the same position.
8 • CHALLENGER Omega X-Trainer | OWNER'S MANUAL
A
HANDLE
PIVOT
BAR
ROD
BRACKET
MIDDLE WIRES
B
MIDDLE
HAND
WIRE
PULSE
PLUG
SENSOR
WIRE
SOCKET
PIVOT
RIGHT
ROD
HANDLE BAR
C
HANDLE
BAR
BRACKET
BUSH
D
RIGHT
HANDLE
BAR
HANDLE
BAR
BRACKET
E
F
RIGHT
LOW
HANDLE
BAR
POST
G
HAND
MIDDLE
PULSE
WIRE
SENSOR
PLUG
WIRE
SOCKET
LEFT
PIVOT
HANDLE
ROD
BAR
H
HANDLE BAR
BRACKET BUSH
I
LEFT
HANDLE
BAR
HANDLE
BAR
BRACKET
J
RIGHT
LOW
HANDLE
BAR
POST
K