Power Management; Video Off In Suspend; Modem Use Irq; Soft-Off By Pwrbtn - Advantech PCA-6184 User Manual

This item allows you to select power supply type-- AT or ATX

3.7.2 Power Management

This category allows you to select the type (or degree) of power saving
and is directly related to the following modes:
1. HDD Power Down
2. Suspend Mode
There are four selections for Power Management, three of which have
fixed mode settings.
Disable (default)
Min. Power Sav-
ing
Max. Power Sav-
ing
User Defined

3.7.3 Video Off In Suspend

When you select "Yes": Video will trun off when computer suspends.
When you select "No": Video will be on when computer suspends.
V/H
SYNC+BLANK
Blank Screen
DPMS

3.7.4 MODEM Use IRQ

This determines the IRQ in which the MODEM can use.The choices: 3, 4,
5, 7, 9, 10, 11, NA.

3.7.5 Soft-Off by PWRBTN

If you choose "Instant-Off", then pushing the ATX soft power switch but-
ton once will switch the system to "system off" power mode. You can
choose "Delay 4 sec." If you do so, then pushing the button for more
than 4 seconds will turn off the system, whereas pushing the button
momentarily (for less than 4 seconds) will switch the system to "suspend"
mode.
PCA-6184 User's Manual
No power management. Disables all four modes
Minimum power management., Suspend Mode = 1
hr., and HDD Power Down = 15 min.
Maximum power management., Suspend Mode =
1 min., and HDD Power Down = 1 min.
Allows you to set each mode individually. When
not disabled, each of the ranges are from 1 min. to
1 hr. except for HDD Power Down which ranges
from 1 min. to 15 min. and disable.
This selection will cause the system to turn off the
vertical and horizontal synchronization ports and
write blanks to the video buffer.
This option only writes blanks to the video buffer
Select this option if your monitor supports the dis-
play power management signaling (DPMS) stan-
dard of the Video Electronics Standards to select
Video Power Management values.
36