Assembly Instructions - Stamina INSTRIDE PLUS Owner's Manual

ASSEMBLY INSTRUCTIONS

Place all parts from the box in a cleared area and position them on the floor in front of you. Remove all
packing materials from your area and place them back into the box. Do not dispose of the packing materials
until assembly is completed. Read each step carefully before beginning. If you are missing a part please
call our toll-free number for assistance 1 (800) 375-7520 or e-mail us at:
RING
B.
STEP 1
LEFT
Lift up the and
MAIN FRAME(1).
the
(2, 3)
down. Refer to illustration A.
NOTE: Always make sure that the
INSTRIDE.
using the
STEP 2
Refer to illustration B. Hook the
PEDAL ARMS(2, 3).
"AAA"
Install one battery into the back of the
WIRE(11) METER(13),
into the
NOTE: 1. Please be careful not to damage the
2. See page 7 for detailed battery installation instructions.
parts@staminaproducts.com
RIGHT PEDAL ARMS(2, 3).
CABLE(9)
Wrap the
CABLE(9)
RESISTANCE CORDS(32)
then slide the
COLLAR
PULLEY BRACKET(7)
Insert the
PULLEY(8)
around the
is properly seated in the groove on the
onto the Rings in the
METER(13),
one battery included. Plug the
METER(13)
onto the
SENSOR WIRE(11)
5
into the Collar on
PEDAL ARMS
and press the two
PULLEY(8)
LEFT
MOUNTING CAP(12).
METER(13).
when attaching the
A.
before
RIGHT
and
SENSOR