Table of Contents
Advertisement
ASSEMBLY INSTRUCTIONS
Place all parts from the box in a cleared area and position them on the floor in front of you. Remove all
packing materials from your area and place them back into the box. Do not dispose of the packing materials
until assembly is completed. Make sure you have all of the parts required for the machine. (Refer to the
assembly drawing.) Read each step carefully before beginning. If you are missing a part please call our
toll-free number for assistance 1 (800) 375-7520.
SUPPORT
FRAME
STEP 1
LOCKING KNOB(20)
UPRIGHT(2).
STEPPER
Unscrew the
from the
Unfold the
to an upright position
SUPPORT FRAME
UPRIGHT(2)
BASE
by lifting up the
and inserting the bottom end of the
into the
FRAME(1).
UPRIGHT(2)
LOCKING KNOB(20).
LOCKING KNOB(20)
Secure the
with the
NOTE: The
UPRIGHT(2).
is threaded. It must be screwed into the threaded hole in the
STEP 2
HANDLEBAR(3)
UPRIGHT(2)
ADJUSTMENT KNOB(21).
Insert the
into the
and secure it with the
HANDLEBAR(3)
NOTE: There are three adjustment holes allowing you to position the
at three
different heights.
STEP 3
ELECTRONIC METER
HANDLEBAR(3)
TOP
BOTTOM
Attach the
onto the
by pushing the
and
METER COVERS(24A, 24B)
together until they are locked.
6
Advertisement
Table of Contents
