Using The Electronic Meter - Stamina INSTRIDE PLUS Owner's Manual

USING THE ELECTRONIC METER

POWER ON : Pedal movement or push any button.
POWER OFF :
Automatic shut off after 4 minutes of
inactivity.
FUNCTION BUTTONS:
MODE :
Push to select the function of the lower
readout.
RESET :
To reset all functions to zero.
FUNCTIONS:
COUNT :
Upper readout displays the total number of strides you have taken, from zero to 9999
strides.
SCAN:
Automatically scans each function of TIME, CALORIE, STRIDES/MIN in sequence with
change every 5 seconds.
TIME:
Displays the riding time, from 1 sec up to 99:59 minutes.
STRIDES/MIN:
Displays the rate of strides per minute.
CALORIE:
Displays the calorie consumption, from zero to 9999 cal.
The calorie readout is an estimate for an average user. It should be used only as a
comparison between workouts on this unit.
NOTE:
The meter will stop counting time automatically after 4 seconds of inactivity. All function
values will be kept. Restart the meter by moving the pedals.
HOW TO INSTALL AND REPLACE BATTERY:
1. Open the Battery Door on the back of the meter.
2. The meter operates with one AAA battery, one battery included. Refer
to the illustration to install or replace the battery.
NOTE:
1. Rechargeable batteries are not recommended.
7
AAA Battery