Installation Overview - Nimbus Water Systems Sierra User Manual

Installation Overview

The following instructions outline a typical water treatment system installation. Consult local plumbing codes and
building regulations as they may pose different or additional requirements for the installation. The installer is respon-
sible for ensuring that the installation is in compliance with all applicable state and local regulations.
This system has been designed for installation by a licensed professional such as a contractor or plumber. Proper
completion of this installation will require basic famil iarity with standard sink plumbing and proper use of common
hand and power tools. Improperly installed systems could result in water damage due to leaks or flooding.
B
A
A. Product water storage tank
B. Tank shut-off valve
C. Tank tubing (3/8" white)
D. Air-gap faucet
E. Drain connection assembly
F. Drain tubing (3/8" white)
G. Quick-connect fitting
H. Drain tubing (1/4" yellow)
Typical Installation Diagram
C
D
G
E
F
41840-A McAlby Court, Murrieta, CA 92562
(800) 451-9343, email: sierra@nimbuswater.com
H
I
I. Product water tubing (3/8" blue)
J. Reverse osmosis membrane filter
K. Carbon post-filter
L. Sediment/carbon pre-filter
M. Automatic shut-off valve
N. Inlet fitting
O. Feed water tubing (1/4" green)
P. Feed water shut-off
N
P
O
J
K
L
M
5