Control Panel Options
Date/Time
Access:
Set Date, Time, Time Zone, and Daylight Savings after cold boot or at anytime.
Note:
There is no change from general desktop PC Date/Time Properties options. Adjust the settings and
click the OK box or the Apply button to save the changes. The changes take effect immediately.
Double-tapping the time displayed in the Taskbar causes this display to appear.
Dialing
Access:
Set dialup properties for internal modems (not supplied/supported by LXE). Tap the "?" and
follow the instructions in Help.
E-EQ-MX3XRG-A
Start | Settings | Control Panel | Date/Time Icon
Factory Default Settings
Current Time
Midnight
Time Zone
GMT-05:00
Daylight Savings
Disabled
Date and time is reset to the default value each time the MX3X is rebooted.
Figure 4-4 Date/Time Properties
Start | Settings | Control Panel | Dialing
Dialing Properties
When dialing from:
Local settings are:
The local area code is:
The local country code is:
Dial using:
Disable call waiting by dialing:
New ...
Dialing Patterns ...
Tone
Pulse
Figure 4-5 Dialing
77
Remove
MX3X Reference Guide