Cleaning And Maintenance - LifeSpan TR7000i Owner's Manual

Innovative Features (continued)
2 USB Ports:
The TR7000i/TR8000i includes a USB port that works with the LifeSpan Fitness Club online
health management system. Before using the treadmill, simply insert your USB flash drive into the left USB port,
after loading your profile from the IHP system onto the flash drive. The USB will read your personal information
and then save your workout data every 20 seconds onto the flash drive. Information saved includes your heart
rate, workout start and finish time, distance traveled, calories burned, and steps taken. This information can be
uploaded into your account, summarized over time and used to compare your results with the goals you set
in your personal LFC account. Prior to using your USB, make sure you refer to the "Getting Started Guide" and
"Success Guide" found in your membership kit, located in your owner's manual packet. Both ports can be used to
charge portable devices such as iPads and cell phones.
Don't remove the USB flash drive while the LED light is flashing red – you may lose your workout
information.
Bluetooth:
The TR7000i/TR8000i series products include a free iPad app that lets you connect wirelessly to
view graphically your heart rate, pace on a quarter-mile track and easily sync results with your LifeSpan Fitness
Club account. Currently LifeSpan does not have an iPhone app. However, other app developers are working on
iPhone apps which could be available in the near future.
Energy Saving Mode:
dimly lit LED below the START button. This will cut power consumption to well under 0.1 watts.

Cleaning and Maintenance

Daily:
It is recommended to wipe the treadmill down after each use to keep the treadmill clean and dry. A mild
detergent may be used at times to help remove all dirt and salt from the belt, painted parts and the display.
Monthly:
This cleaning would include removing the motor cover and cleaning around the motor and
electronics. It is recommended to clean the motor compartment if the treadmill is in an area where there might
be plush carpet fibers that could get pulled up into the motor compartment. It is a good idea at this time to
check and tighten all assembly hardware, power cord for damage, or anything else that would indicate the need
for service.
Warning:
Unplug the power cord before removing the motor cover
Important:
If service is required, turn the power off and remove the power cord to ensure the unit cannot be
used. Let all other users know the unit needs service.
Caution:
Acidic cleaning detergents may damage painted or powder coated surfaces and should not
be used. Such cleaners may void the LifeSpan warranty.
Suggestion:
It is always a good idea in a commercial setting to have someone on staff or a local
service provider to perform periodic maintenance on the treadmill. For help finding a local service
provider that will perform periodic maintenance, please contact customer service at 877.654.3839 x 4
(US and Canada only).
The energy saving mode cuts all power to the treadmill with the exception of one
TR7000i/TR8000i
Treadmill
27