Auto Channel Switching Time; Dsc Beep - Standard Horizon Eclipse GX1300 Owner's Manual

10.3.8 Auto Channel Switching Time

When a DSC distress call or an all ships call (urgency or safety) is received,
the GX1300 will automatically switch to the channel 16.
This menu selection allows the automatic switching time to be changed.
1. Press the MENU key to display the menu.
2. Press the ▲ / ▼ keys to select " SETUP ", then
SELECT
press the
3. Press the ▲ / ▼ keys to select " DSC SETUP ",
then press the
BACK
press the
4. Select " CH SWITCH TIMER " with the ▲ / ▼
keys, then press the
5. Press the ▲ / ▼ keys to select the desired
time, then press the
switching time can be set to "OFF", "10 sec",
"30 sec", "1 min", or "2 min".
BACK
6. Press the

10.3.9 DSC Beep

This feature allows the alarm beeps to be turned on (default setting) or off
when a DSC call is received. The DSC calls that can be customized are:
individual, group, all ships, position request, position report call.
Refer to section "9.6.4 Setting up the Group Call Ringer" for setting.
Page 98
soft key.
SELECT
soft key. (To cancel,
soft key.)
SELECT
soft key.
E N T E R
soft key to exit the menu and return to radio operation.
soft key. The
BACK SELECT
SETUP
DSC SETUPGROUP
CHANNEL SETUP
CONFIGURATION
BACK SELECT
DSC SETUP
AUTP POS POLL
AUTO POS TIME
CH SWITCH TIMER
DSC BEEP
BACK SELECT
CH SWITCH TIMER
OFF
10 sec
30 sec
1 min
BACK ENTER
GX1300