4. In the
Adjust RTC
to decrease the RTC value.
5. Press G (
Setting Alarm Limits
When you adjust alarm limits, the lower alarm limit appears in blue text in the
information zone and upper alarm limit appears in red text in the information zone. The
low alarm indicator ( ) and high alarm indicator ( ) also move on the temperature
scale.
When you scan a target that registers a temperature exceeding one of the alarm limits:
A blinking alarm indicator appears on the Imager display
If the center pixel target temperature exceeds the alarm limit, the center image
will blink and alarm value turns bold blue or bold red depending on which limit
has been exceeded.
The default low alarm limit is -10 C (14 F) and the default high alarm limit is
350 C (662 F).
1. From the Home display, press G (
Alarm and Sleep Mode display.
function, Press F (2) to increase the RTC value or H (1)
) to return to the Home display.
DONE
Advanced Imager Operation
) four times to navigate to the Adjust
MENU
3
Setting Alarm Limits
dag122f.bmp
3-7