Life Gear G1 Owner's Manual page 35

Routing the Abdominal Cable
Insert the cable around the Pulley (60) at the front of the Pulley (60) on the Main Support
Tube (2) then pull it downwards to the Pulley (60) on the Pulley Plates (27). Draw the
Abdominal Cable (32) around the Pulley (60) on the Pulley Plates (27) then pull it upwards to
the Double Floating Pulley Bracket (19). Draw the Abdominal Cable (32) around the Pulley
(60) on the Double Floating Pulley Bracket (19) then pull it downwards to connect the Hook
(63) to the end of the Abdominal Cable (32) and Coil Chain (64). Connect the other Hook
(63) to the Coil Chain (64) and Main Base Tube (1). Connect the Hook (63) to the ball
stopper end of the Abdominal Cable (32) and Abdominal Strap (34).
PLEASE REFER TO THE "CABLE LOOP DIAGRAM" SECTION ON PAGE
24.
Hardware:
3 Hooks 1 Coil Chain (200)
Accessories
1 Abdominal Strap
34