INCORRECT
HOLE
6
43
88
Tool:
CORRECT
24
78
1 Allen Wrench (6mm)
Step 3
Slide two Rubber Bumpers (43) onto the Weight Stack Sliding Rods (6). Then insert two
Stack Sliding Rods (60) into the holes of the Bottom Cover Support (88) and Rear Stabilizer
(24). Secure the Stack Sliding Rods (60) with two M10x20 Hex Socket Bolts (78). Tighten
bolts with the Allen Wrench provided.
Hardware:
2 Rubber Bumpers
2 Hex Socket Bolts (M10x20)
13