Life Gear G1 Owner's Manual page 19

92
69
74
87
92
7
8
62
Tool:
2 Wrenches (19-17)
Step 8
Attach the Leg Extension Tube (8) onto the clevis of the Seat Support Frame (7) with one
M12x85 Hex Bolt (87), one M12 Nylon Lock Nut (69), and two Ø12 Flat Washers (74).
Tighten bolt and nut with two Wrenches provided.
Install two M12 Hex Nut Caps (92) onto the M12x85 Hex Bolt (87) and M12 Nylon Lock Nut
(69).
Insert the Ring Pin (62) into the holes on the Seat Support Frame (7) and the clevis of the
Leg Extension Tube (8).
Hardware:
1 Hex Bolt (M12x85) 2 Flat Washers (Ø12) 1 Nylon Lock Nut (M12)
1 Ring Pin
2 Hex Nut Caps (M12)
18