Life Gear G1 Owner's Manual page 23

93
70
75
11
12
Tool:
1 Wrench (19-24)
Step 12
Attach the Right Butterfly Arm (12) onto the Support Frame for Butterfly Arm (11) with one
Ø16 Flat Washer (75), one M16 Nylon Lock Nut (70). Tighten nut with the Wrench provided.
Install one M16 Hex Nut Caps (93) onto the M16 Nylon Lock Nut (70). Use the same
procedure to install the Left Butterfly Arm (13) onto the Support Frame for Butterfly Arm (11).
Hardware:
2 Flat Washers (Ø16) 2 Nylon Lock Nuts (M16) 2 Hex Nut Cap (M16)
22