Life Gear G1 Owner's Manual page 18

77 68
86 77
7
25
Tool:
2
2 Wrenches (19-17)
Step 7
Attach the Seat Support Frame (7) onto the Main Support Tube (2) with one Curve Plate I
(25), two M10x80 Hex Bolts (86), two M10 Nylon Lock Nuts (68), and four Ø10 Curve
Washers (77). Tighten bolts and nuts with two Wrenches provided.
Hardware:
2 Hex Bolts (M10x80) 2 Nylon Lock Nuts (M10)
4 Curve Washers (Ø10)
17