Life Gear G1 Owner's Manual page 13

2 69
4
68
73
73
Tool:
86
1
2 Wrenches (19-17)
Step 2
Attach the Main Support Tube (2) onto the Main Base Tube (1) with two M10 Nylon Lock
Nuts (68), two M10x80 Hex Bolts (86), and four Ø10 Flat Washers (73). Tighten bolts
and nuts with two Wrenches provided.
Attach the Side Pulley Bracket (4) onto the tube of the Main Base Tube (1) with one M12
Nylon Lock Nut (69). Tighten nut with one Wrench provided.
Hardware:
2 Nylon Lock Nuts (M10) 4 Flat Washers (Ø10) 2 Hex Bolts (M10x80)
1 Nylon Lock Nut (M12)
12