Accessories - Honeywell Sensepoint XCD RFD Technical Handbook

Sensepoint XCD RFD Technical Manual

4.3 Accessories

A range of accessories are available to allow use of Sensepoint XCD RFD in a wide
variety of applications. These include Pipe mounting bracket, Sunshade deluge cover,
Sensor collecting cone, Sensor flow Housing and Remote sensor mounting junction
boxes.
For Sensepoint XCD
(P/N: SPXCDWP)
Standard Weather Protection
The Standard Weather Protection is designed to
protect the sensor from changes in environmental
conditions. This is recommended to be fitted to
a Sensepoint XCD sensor and Sensepoint /
705 sensors.
For UL/CSA Junction Box
(P/N: 2430-0021)
Remote Sensor Mounting
UL aluminum junction box, ATEX standard junction box and
ATEX High temperature junction box (P/N: 2052D0001) are
optional accessories that can be used for remote sensor
mounting. Make the connection from the junction box to
the transmitter using suitable cable and cable glands.
Sensepoint Filter and Filter Housing
Sensepoint Stainless steel filter (P/N: 00780-
F-0018) and Filter Housing (P/N: 00780-C-
0038) is an optional accessory can be used to
offer additional protection to the Sinter in dry,
and dusty applications.
For Sensepoint / 705
(P/N: 02000-A-1640/1635)
For ATEX Junction Box
(P/N: 00780-A-0100)
Calibration Cup
The Gassing Cap (P/N: S3KCAL) is an optional
accessory that may be temporarily fitted to
Sensepoint XCD flammable sensors for Gas
Response checking during commissioning and
routine maintenance.
For Sensepoint XCD
(P/N: SPXCDCC)
Collecting Cone
The Collecting Cone is an optional accessory
that may be fitted to the Weather Protection
of XCD and Sensepoint / 705 sensors.
The collecting cone is designed for use with
gases that are lighter than air.
Calibration Gas Flow Housing
The Calibration Gas Flow Housing (P/N: 02000-
A-1645) may be used for either calibration of the
Sensepoint / 705 sensor or if the Sensepoint /
705 sensor is to be used as part of a Aspirated
10
SPXCDHMRFEN Issue 4_08-2016
For Sensepoint / 705
(P/N: 02000-A-1642)
Sampling System.