Panasonic DF-1100 Service Manual page 288

Panasonic DF–1100
No.
13 AUTO JOURNAL PRINT
14 FILE ACCEPTANCE
17
22 SUBSTITUTE RCV
24 PRINT REDUCTION
25 REDUCTION RATIO
26 POLLING PASSWORD
27 POLLED FILE SAVE
28 STAMP AT MEM. XMT
30
31 INCOMPLETE FILE
34 POWER SAVE TIMER
37 RCV TO MEMORY
38 FAX ACCESS CODE
40 RELAY XMT REQUEST
Continued on the next page.
03002990001
#@multitude
8–14
Setting
Parameter
Number
1
2
1
REPORT
2
RECEIVE MODE 1
2
1
2
1
2
70
100
1
2
1
2
DRD SERVICE 1
2
1
SAVE SAVE
2
--
--
1
2
Setting
Invalid Selecting whether the machine prints the journal
automatically after every 32 transactions. automatically after every 32 transactions.
Valid
Invalid Selecting whether the machine prints the file acceptance
journal. If you set this parameter to valid, the journal will be j y
printed out after entering any communications using i t d t ft
Valid
memory.
Manual Setting the reception mode to either automatic or manual.
Auto
Invalid Selecting whether the machine receives to memory when
recording paper runs out toner runs out or recording paper recording paper runs out, toner runs out or recording paper
is jammed.
Valid
Selecting print reduction mode.
Fixed
Fixed:Reduce received document according to the setting of
Parameter No. 25. Parameter No 25
Auto: Reduce received document according to the length of
Auto
received documents.
70% Selecting fixed print reduction ratio from 70% to 100%. This
parameter functions only when fixed print reduction is parameter functions only when fixed print reduction is
selected on Fax Parameter No. 24.
100%
(----) Setting a 4-digit password for secured polling.
Invalid Selecting whether the machine retains the polled
documentin memory even after the document is polled once document in memory even after the document is polled once.
Valid
Invalid Selecting whether the machine stamps the original
documents when storing the documents into memory documents when storing the documents into memory.
(dependant on the Stamp setting on the Control Panel.)
Valid
Invalid Selecting whether or not the machine is available "DRD
Service". If this parameter is set to "Valid", your machine
d detects the specified ring pattern only to receive a document h ifi d i
Valid
automatically.
Invalid Selecting whether the machine retains the document in
memory if the document is not successfully transmitted. memory if the document is not successfully transmitted
Valid
To reduce the power consumption of the machine in standby,
Start-Time
select the time period to turn off the high temperature fuser
unit when the printer is idle. unit when the printer is idle
Factory default is always "ON" (When Start = 00:00 and End
End-Time
= 00:00).
Enter a 4-digit password used to print out the received
document in memory by F8-5 (RCV TO MEMORY). When
(----)
F8-5 is set to On, this parameter will not be shown on the LCD
display.
Enter a 4-digit Access Code to secure the machine against
(----)
unauthorized use.
Invalid Selecting whether the machine performs Relay XMT
Request. Request
Valid
Comments
, j
t i i ti
, y
l i d
i