Panasonic DF-1100 Service Manual page 206

Panasonic DF–1100
Laser Unit
Laser
A 5 mW Laser Diode, with a wave length of 780 nm ( 20 nm), provides a modulated beam controlled by
nVIDEO. The beam power on the drum surface is approximately 0.4mW, and is controlled by the monitor
circuit.
Collimator Lens
This lens converges and focuses the laser beam, converting it to parallel light.
Aperture
This controls the size of the laser beam.
Polygon Mirror and Motor
The polygon scanner consists of a 6–sided mirror, directly driven by a Polygon motor, revolving at 10,000
rpm. The laser beam is reflected against these mirrors and swept over the recorded width in the scanning
direction. This unit features a stable line scanning speed, a precision mirror reflection angle, a reflection free
surface, and instant start.
Beam Detection (BD) Lens and Beam Detection (BD) Sensor
The BD Lens receives the reflected light from the Polygon Mirror and redirects it into the BD Sensor, which
converts the laser beam into electrical signals and sets the start timing for the scanning line.
lens
This amorphous plastic, molded lens is designed to provide parallel laser light across the surface of the drum,
providing a constant scanning speed.
6–10