Information Codes: 401, 402, 422 - Panasonic DF-1100 Service Manual

Panasonic DF–1100

4.3.2 Information Codes: 401, 402, 422

401
START
Is the ID Number programmed
into your machine?
Yes
Is the Receiving unit set up for
Selective Receive?
No
Is the Receiving unit set up for
Password Reception?
No
Are you sending a Confidential
Mail?
No
Not sure how to finish, ask
Your engineering to complete it.
Are you sending a document
by Relayed Transmission?
No
END
4–6
402, 422
START
Is communication with the
reference unit successful?
Yes
Check the remote unit in question.
(Remote unit defective)
END
No
Program the ID Number.
Yes
Check the Selective Receive
settings at the receiving unit.
Yes
Program the Receive Password
to match with the receiving unit.
(Fax Parameter No.44)
Yes
Check with the receiving end,
the mailboxes may be full.
Yes
Check the Relayed Transmission
settings at the Relay Station.
No
Replace the FCB PCB.