Panasonic DF-1100 Service Manual page 11

(13) Multi-file Transmission
It is possible to store multiple documents, each of which could be transmitted to different destinations,
into the document memory. Then the unit will transmit them sequentially (max. number of files : 30 files).
(14) Deferred Communication
The 30 built-in 24-hour timers allow the operator to set deferred transmissions or deferred polling. Using
the document memory, documents can also be transmitted to multiple stations.
(15) Substitute Reception
The contents of a document will be received into the document memory if the recording paper or toner
runs out, or a recording paper jam occurs during reception. The stored documents can be printed after
replacing the recording paper or toner cartridge or correcting a paper jam.
(16) Dual Operation
Dual Access operations can store documents and their destinations even during reception or memory
transmission. It can also receive during document storage.
(17) Photo (Halftone)
For transmission or copying, this function ensures high quality reproduction of gray-shaded or
photographic documents. This machine uses 64 levels of error diffusion to create halftones with Quality
mode.
(18) Copy Function
The Copy function allows the machine to be used as a copier. Using the document memory, up to 99
copies can be made of a single original.
(19) 32 Transaction Journal
The 32 Transaction Journal provides transaction information — number of pages transmitted or
received, start date and time, communication results, identification, etc. It is automatically printed after
every 32 transactions, or it can be printed manually at anytime.
(20) Latest Individual Transmission Journal
The latest Individual Transmission Journal provides information on the last transmission – number of
pages transmitted, start date and time, communication results, identification, etc. It can be printed
manually at anytime after communications.
(21) Communication Journal
A communication journal is a result report of a communication which can be printed automatically after
communication is completed. Printout conditions can be selected for each communication to 1) not
print, 2) always print, or 3) print when communication has failed.
(22) Multi-purpose LCD Display
The 20 x 2 Alphanumeric LCD display shows the operation mode, date and time, remote ID number,
and pages transmitted or received. In case of an error, the LCD display shows an information code and
error message indicating the exact cause of trouble.
(23) Verification Stamp
The Verification Stamp is automatically stamped on the original document when the document is
transmitted or stored in memory successfully. The " " mark appears at the bottom of each page.
(24) Password Transmission
A password transmitted from the other party is checked to prevent the transmission of documents to
an unauthorized station.
General Description
1–3