(10)
(13)
(14)
(16)
(18)
(19)
(20)
(17)
(10) Three Screws (19).
(11) Remove the Scanner Cover (1122).
(10)
(11)
(12) Disconnect Connector CN80 on the CONS PC Board.
(13) Remove the Scanner Unit (1241).
(12)
(14) Two Screws (36).
(15)
(15) Disconnect Connector on the Transmit Motor.
(16) Remove the Flatbed Transmit Motor (1250).
(17) Disconnect Connector CN2 on the Inverter PC Board.
(18) Two Screws (19).
(19) Remove the Lamp Plate Springs (1121).
(20) Remove the Xenon Lamp (1120).
Caution: When re–installing the Xenon Lamp, make sure
that the Xenon Lamp is inserted as illustrated on the
left.
Disassembly Instruction
2–17