Troubleshooting
4.4.10 Improper Fusing (Printed image does not bond to the paper)
P
START
Yes
Is the recording paper damp?
No
Replace the paper.
No
Is the Fuser Unit normal?
Yes
Replace the Fuser Unit. (See Note)
END
Note: If the Thermostat and/or Thermal Fuse is damaged by a Fuser over heat condition, other parts
within the Fuser Unit may also be damaged and should be replaced at the same time (See
the parts with an "*" in the Parts List) or replace the entire Fuser Unit instead.
4–27