Panasonic DF-1100 Service Manual page 174

Hide thumbs Also See for DF-1100:
Table of Contents

Advertisement

Panasonic DF–1100
No.
Parameter (see Note3)
82
82
JAM LENGTH
JAM LENGTH
83
83
SCAN SIZE
SCAN SIZE
84
84
LINE AS NO PAPER
LINE AS NO PAPER
85
Not used
86
Not used
87
DARKEST LEVEL
88
NORMAL LEVEL
89
LIGHTEST LEVEL
90
Not used
91
Not used
92
92
SMOOTHING
SMOOTHING
93
93
POWER SAVE TIMER
POWER SAVE TIMER
94
Not used
99
Note 1: No. 70 LINE ERROR – Transmit condition of RTP/PIP or RTN/PIN
Setting
1 : 128
Signal
MCF/PIP
RTP/PIP
RTN/PIN
Note 2: No. 71 TOTAL ERROR – Transmit condition of RTP/PIP or RTN/PIN
Setting
Signal
MCF/PIP
RTP/PIP
RTN/PIN
Note 3: The default setting of parameters depends on the country's specifications or regulations. Print the
Function Parameter List to confirm the default settings.
5–8
Function Parameter Table
Selections
1 = 1 m
2 = 2 m
3 = Unlimited
1 = A4
2 = LTR
1 = Ring (ring)
2 = Busy (keep line busy)
0 = Lightest Contrast
10 = Darkest Contrast
1 = Off
2 = On
1 to 255 minutes in 1 minute step
1 to 255 minutes in 1 minute step
2 : 256
0-31
0-63
32-63
64-127
64-127
128-255
1 : 5%
2 : 10%
0-2
0-4
3-4
5-9
5-
10-
Selects the maximum length of a document that can be
Selects the maximum length of a document that can be
scanned
scanned.
FAX Mode : 1. Flatbed transmission, sets the Original
size. (Length and Width)
2. ADF transmission, sets the Original
width. (The actual document length is
width. (The actual document length is
detected by the Read Point Sensor)
COPY Mode : Sets the Home position for the
ORIGINAL key.
Selects whether to ring or send a busy tone to the
remote station when recording paper runs out or the
remote station when recording paper runs out or the
unit cannot receive because of any trouble.
Selects the contrast level.
Selects the contrast level.
0 1 2 3 4 5 6 7 8 9 10
0´1´2´3´4´5´6´7´8´9´10
Lightest²
Li h
Selects whether the smoothing function is available.
Selects whether the smoothing function is available
Selects the idle eriod before the fusing heater is turned
Selects the idle period before the fusing heater is turned
off after the last printing.
3 : 512
4 : 1024
0-127
0-255
128-255
256-511
256-511
512-1023
3 : 15%
4 : 20%
0-7
0-9
8-14
10-19
15-
20-
Function
g
y
³Darkest
D k
5 : 2048
6 : Off
0-511
Always
512-1023
-
1024-2047
-

Advertisement

Table of Contents
loading

Table of Contents