Care And Maintenance - Jensen JiMS-252i User Manual

W166-R(JiMS-252i)_GB_ES IB.indd 15 18 -
size:148x210mm,80gms book paper,BK+BK.
22 15 2012-2-28 8:36
ES

CARE AND MAINTENANCE

- Do not subject the unit to excessive force, shock, dust or extreme temperature.
- Do not tamper the internal components of the unit.
- Clean your unit with a damp (never wet) cloth. Solvent or detergent should never be used.
- Avoid leaving your unit in direct sunlight or in hot, humid or dusty places.
- Keep your unit away from heating appliances and sources of electrical noise such as fluorescent
lamps or motors.
Resetting the Unit
If the unit experiences a power surge or electric shock, it is possible that the internal micro-controller
may lock up and the unit will not respond to any commands from the panel controls.
In this event, use a straightened paper clip, toothpick or similar objects to press the RESET button
located at rear of the unit (see the below figure). The reset operation clears the system memory and all
of your previous settings will be erased.
CAUTION: DO NOT USE A SHARP OR POINTED OBJECT TO PRESS THE RESET BUTTON.
IT MAY DAMAGE THE RESET SWITCH INSIDE THE UNIT.
RESET Button
GB
15