Resetting The Unit; Care And Maintenance - Jensen JiLS-525iB User Manual

If this unit was exposed to a power surge or electric shock, it is possible that the internal
micro-controller may lock up and the unit will not respond to any commands from the front
panel controls or remote control. In this event, you can do one of the following:
1. Unplug the DC power cord plug of the AC Adaptor from the unit and then reconnect after
about 10 seconds.
2. Use a straightened paper clip, toothpick or similar objects to press the Reset Button which
is located at back of the unit.
Warning:
Do not use sharp, pointed object to press the Reset Button. It can damage the switch inside
the unit.
RESETTING THE ALARM SETTING AND MEMORY SETTINGS
Pressing the RESET button which is only reset the unit to normal operation from the abnormal
situation. It will not clear the FM radio preset station memory or alarm setting. In order to do
so, you may implement following steps.
(1) Connect the DC plug of the AC adaptor to the unit.
(2) In power off mode, press and hold the EQ button on the main unit, the display will show "
CLr ". Keep the EQ button pressed until the clock time shows again. Release the EQ
button. Use a straightened paper clip, toothpick or similar object to press the Reset Button
which is located on the back of the unit. The alarm settings and radio presets are now
reset to the default settings.
CLEANING THE UNIT
To prevent fire or shock hazard, disconnect your unit from the AC adaptor and Apple device
when cleaning.
The finish on the unit may be cleaned with a dust cloth and cared for as other furniture.
Use caution when cleaning and wiping the plastic parts.
If the cabinet becomes dusty wipe it with a soft dry dust cloth. Do not use any wax or
polish sprays on the cabinet.
If the unit becomes dirty or smudged with fingerprints it may be cleaned with a soft cloth
slightly dampened with a mild soap and water solution. Never use abrasive cloths or
polishes as these will damage the finish of your unit. Never allow any water or other liquids
to get inside the unit while cleaning !

RESETTING THE UNIT

CARE AND MAINTENANCE

19