Listening To Your Ipod/Iphone - Jensen JiMS-252i User Manual

W166-R(JiMS-252i)_GB_ES IB.indd 8 18 -

LISTENING TO YOUR iPod/iPhone

Playing iPhone / iPod music
1. Use the iPod adaptor included with your iPod (if needed) and insert it into the docking area. No adaptor
required if you use an iPhone. Your iPod/iPhone can now be inserted into the docking bay by placing
the connector on the bottom of the iPhone/iPod onto the connector in the docking station.
Note: Please be careful when seating the iPhone/iPod into the docking bay to avoid damaging the
30-pin connector on the iPhone/iPod or in the docking system.
2. Tap the / FUNCTION button on main unit or
power status LED indicator lights steadily.
3. Tap the / FUNCTION button on main unit or FUNC button on remote control to select iPod
mode, the indicator "iPod" displays.
4. Press the button to start iPhone/iPod music playback. Press it again to pause.
5. Adjust the sound level by pressing the VOLUME Up (+) / Down (-) button.
Note: 1. The volume level cannot be adjusted using the volume control on your iPhone/iPod after being docked.
2. The iPod/iPhone will charge in all modes.
6. To remove the iPod/iPhone from the unit, press and hold the
switch off the device and then gently remove it from the docking connector.
7. Press and hold the / FUNCTION button on main unit or tap
turn unit into standby mode after listenning. The power status LED lights off.
iPhone / iPod playback control
— Press the button to pause or resume the iPhone/iPod playback.
— Press the / button to skip to the next or previous song.
— Press and hold the / button for fast-forwarding or fast-rewinding during playback.
iPod/iPhone control function keys (using remote control)
- To set iPod music play-mode in random, press the SHUFFLE button.
- To set iPod music in repeat play-mode, press the REPEAT button.
- To mute the volume, press the MUTE button. Press the MUTE button again to resume
listening to the music.
- To access your iPod / iPhone menu, press the MENU button.
- To navigate and select your iPod/iPhone menu, tap the Up
from your iPod /iPhone to highlight and select desired items.
Note: 1. The iPod Menu Control function will work with most iPod touch/iPhone models in iPod mode.
Please make sure your iPod/iPhone is in Music or iPod mode. The function will NOT work if
the iPod/iPhone is on the MAIN or LOCKED screen.
2. The iPod menu navigating function of remote control will work on most iPhone
or iPod models except iPod nano 6th gen.
WATCH VIDEOS ON YOUR iPod/iPhone
The default setting of this unit is to play back video on the screen of your iPod, iPod touch and iPhone.
However, if your iPod has TV out ON/OFF selection, then you may need to set TV out of your iPod to
OFF manually.
1. Dock your iPod/iPhone carefully and securely onto the Docking Connector.
2. Tap the button on the main unit or remote control to turn on the unit. Press the FUNCTION
(FUNC) button to select iPod mode.
3. Access the video menu of your iPod/iPhone and select the video clip you want to play.
4. Press the Enter button of your iPod/iPhone, the video will start play back on the LCD screen of
your iPod/iPhone.
5. After selecting the video you wish to view and it starts to play, press the
unit or remote control to Play/Pause the video.
6. Tap the Button to advance to end of the current clip. Press and hold it during playback for fast
forward search within the clip.
size:148x210mm,80gms book paper,BK+BK.
8 29 2012-2-28 8:36
GB
button on remote control to turn on the unit, the
button for three seconds to
button on the remote control to
/ Down / ENTER buttons as
button from the main
8
ES