When To Replace Backup Battery; How To (Re) Place Backup Battery - Opticon PHL 4100 User Manual

2.2.6 WHEN TO REPLACE BACKUP BATTERY?

Check the battery monitor regularly if the backup
battery needs replacement. There are 3 possible
reasons;
• Low battery
• Battery not inserted
• Battery wrongly inserted
2.2.7 HOW TO (RE) PLACE BACKUP
BATTERY?
ONLY USE THE BATTERY AS RECOMMENDED
BY OPTICON.
MAKE SURE THAT THE MAIN BATTERY IS FULL
ENOUGH WHILE CHANGING THE BACKUP
BATTERY.
A B
Unlock backup battery case adapter: (ref. A)
• Turn the terminal off.
• Place the terminal faced down.
• The adapter is now positioned on the right side.
• Loosen the 2 screws of the adapter by use of a
small crosshead screwdriver or swatch
screwdriver.
• Slide the adapter to the outside.
• Remove old battery by simply pulling out.
Installing backup battery: (ref. B)
• Hold the adapter with the + mark pointed
upwards.
• Take the backup battery with its positive (+) side
also pointed upwards.
• Push the backup battery in the compartment of
the adapter.
Lock backup battery case adapter: (ref. C)
• Slide the adapter into the terminal. Hereto keep
the terminal face down and keep the positive side
of the backup battery upwards.
• Fix the adapter by fastening the two screws hand
tight.
PHL4100/IRU4100 OPTICON - 15
C