Table of Contents
Advertisement
2.2 BATTERY INSTRUCTIONS
FOLLOW THE INSTRUCTIONS FOR
INSTALLING, CHARGING AND REMOVING THE
BATTERIES VERY STRICTLY.
WRONG USE OF BATTERIES MIGHT CAUSE
SERIOUS DAMAGE TO THE TERMINAL OR TO
THE CRADLE.
THE PRODUCTS ARE NOT WARRANTED FOR
DAMAGE, DEFECTS, MALFUNCTION OR LOSS
OF DATA, RESULTING FROM INCORRECT USE
OF BATTERIES.
Never change the main battery while the
backup battery is out.
Doing so can crash the application.
Use proper battery
Only use the Opticon rechargeable battery as
specified from Opticon or your local dealer.
Do not make a mistake regarding the polarity of
the battery.
The terminal will not work when the battery is
placed incorrect.
2.2.1 REQUIRED BATTERIES
The terminal needs both main battery and backup
battery for operation.
• Main battery: use the rechargeable Opticon
battery as supplied with the terminal. The main
battery can be a standard type (LBP 4100) or a
larger type with more capacity (LBP 4300). See
also product ordering information. In this chapter
the standard type is described, it is applicable for
all main battery types.
• Backup battery: use CR2032 Li (Lithium, button
type) as supplied with the terminal.
2.2.2 BATTERY MONITOR
CHECK THE BATTERY STATUS OF MAIN
BATTERY AND BACKUP BATTERY
REGULARLY.
12 - OPTICON PHL4100/IRU4100
The battery monitor in the status bar displays the
indicated status of the main battery:
Main battery full
Indication of remaining capacity
Main battery low, (re)place immediately.
Pressing the battery monitor with the stylus will
show the measured remaining capacity and the
backup battery status:
Sufficient backup battery capacity
No backup battery, (re)place immediately.
In order to record the status for the backup battery
it is advised to press regularly on the battery
monitor to see if there is sufficient backup battery
capacity.
Advertisement
Table of Contents
