Installation Instructions; Tools Required; Hardware Supplied; Materials Required - Monogram Built-in refrigerators Installation Instructions Manual

36” built-in all-refrigerators and all-freezers
Hide thumbs Also See for Built-in refrigerators:
Table of Contents

Advertisement

TOOLS REQUIRED

Stepladder
Bucket
Level
Appliance
hand truck
open-end wrench

GROUNDING THE UNIT

IMPORTANT - (Please read carefully)
a three-prong (grounding) plug which mates with
a standard three-prong (grounding) wall receptacle
to minimize the possibility of electric shock hazard
from this appliance.
a qualified electrician to make sure the outlet
is properly grounded.
Where a standard 2-prong wall outlet is encountered,
it is your personal responsibility and obligation to have
it replaced with a properly grounded 3-prong wall
outlet.

Installation Instructions

Safety glasses
Pliers

HARDWARE SUPPLIED

3 lag screws
Water filter
bypass plug
4 Washers

MATERIALS REQUIRED

panels
FLOORING
For proper installation, this product must be placed
on a level surface of hard material that is at the same
be strong enough to support a fully loaded refrigerator
or freezer, or approximately 1,200 lbs. per unit.
NOTE:
section of the cardboard carton and place under
the product where you are working.
NOTE:
10
(Secured to side of unit.)
5 toggles with bolts
Supplied Toekick
(Secured to side of unit.)

Advertisement

Table of Contents
loading

Table of Contents