Buzzer (Programming Level 5) - Miele G 8066 Operating Instructions Manual

4. Buzzer (Programming
level 5)
Programming level 5 allows you to
activate a buzzer to sound when
– a programme has finished = a
reminder tone
– a fault has occurred = an alarm tone
If the buzzer is sounding, you can
switch it off early by
– Pressing 6 (Fault confirmation for
F0E, F2E),
– Pressing Z (interruption to the power
supply)
– Opening the door at the end of a
programme (interruption to the power
supply)
If the fault has not been rectified, the
buzzer will start again after power
has been restored.
4.1 Setting the buzzer.
You must first call up Programming
level 5 as follows:
^ Switch off the machine with the Z
button.
^ Press and hold A and 6 at the
same time and, whilst doing so,
switch the machine on with the On
button Y.
The current programme status P... will
show in the display.
The p indicator light will come on.
^ Press the y button five times. 5 will
appear in the display (Programming
level 5).
Programming special functions
You can then set the buzzer as follows:
^ Press the z button repeatedly until
5.01 appears in the display.
^ Press A once. The current status of
the function will appear in the display,
e.g. 0. This is the factory default
setting.
^ Press A repeatedly until the function
you want 0, 1, 2, or 3 appears in the
display.
0 = Buzzer is switched off
(factory default setting)
1 = Buzzer will sound at the end of a
programme
2 = Buzzer will sound when a fault has
occurred
3 = Buzzer will sound when a fault has
occurred and at the end of a
programme
It is not possible to deactivate the
buzzer if the door is open.
Value set:
4.2 To save your changes
^ Press 6. SP will appear in the
display.
^ Press 6 again. The alteration is now
saved.
^ Switch off the machine with the Z
button.
39