Loading The Machine - Miele G 8066 Operating Instructions Manual

Preparing the load
Remove coarse residues and empty all
containers before loading into the
machine.
,
Do not use metal scourers or
wire wool to remove residues.
Danger of corrosion. Only use a
non-abrasive stainless steel spiral
sponge, soft nylon brush, plastic
sponge or similar.
Inadequate pre-cleaning can block the
filters and reduce the washing
efficiency of the machine.
Important:
– Load items so that water will come
into contact with all surfaces. This
ensures that they will be properly
cleaned.
– Do not place items to be cleaned
inside other pieces where they may
be concealed.
– Hollow vessels such as cups,
glasses, pots etc. should be inverted
and placed in the correct inserts.
The water must be able to access
them unhindered.
– Deep-sided items should be placed
at an angle to make sure water runs
off them freely.

Loading the machine

– Tall, narrow, hollow items should be
placed in the centre of the baskets to
ensure better water coverage.
– The spray arms must not be blocked
by items which are too tall or which
hang down in their path. If in doubt,
test for free movement by manually
rotating the spray arms.
,
Cutlery can be placed in any
order in the cutlery holders with the
handles upwards.
Cutlery placed handle down will
come out drier, however, be careful
when sorting items with sharp
pointed ends and positioning them
in the machine that you do not hurt
yourself or create a danger for
others. Sharp knives, forks etc.
should always be placed in the
cutlery holders with the pointed
ends facing downwards.
Select baskets and inserts which are
appropriate for the application.
23