Installation - Miele G 8066 Operating Instructions Manual

Installation

Please refer to the installation
diagram supplied with the machine.
,
Furniture and fittings installed
near the machine must be of a
commercial standard able to
withstand the effects of steam and
condensation.
The machine must be installed correctly
and levelled.
Any unevenness in the floor level can
be compensated for and the height of
the machine raised or lowered by
adjusting the four screw feet.
The machine can be installed in the
following ways:
– Built-under (standard):
The machine can be installed under a
continuous worktop or sink drainer.
The recess must be at least 60 cm
wide, 60 cm deep and 82 cm high.
– Free-standing (optional)
(A "Lid" conversion kit is required)
– Slot-in or at the end of a row
(optional):
The machine can be installed next to
other machines or furniture, or in a
suitable niche. The niche must be at
least 60 cm wide and 60 cm deep. (A
"Lid" conversion kit is required)
54
Cover plate (protects the worktop)
The underside of the worktop must be
protected against water damage by a
stainless steel plate.