1.1 Setting the cleaning agent
dispensing method
To set the dispensing method, first call
up Programming level 2 as follows:
^ Switch off the machine with the Z
button.
^ Press and hold A and 6 at the
same time and, whilst doing so,
switch the machine on with the On
button Y.
The current programme status P... will
show in the display.
The p indicator light will come on.
^ Press the y button twice. 2 will
appear in the display (Programming
level 2).
Select the dispensing method as
follows:
^ Press the z button once.
2.01 will appear in the display.
^ Press the A button once. 0, 1, 2, or
3 will appear in the display.
0 = powder cleaning agent, placed on
the inside of the door (G 8066 and
G 8066 WES)
1 = liquid cleaning agent dispensed
via the built-in dispensing pump,
Option 1
(G 8066 DOS and G 8066 WES DOS)
2 = liquid cleaning agent dispensed
via an external DOS Module, Option 2
(G 8066 DOS and G 8066 WES)
3 = liquid cleaning agent dispensed
via the built-in dispensing pump
connected to an external container,
Option 3 (G 8066 DOS and G 8066
WES DOS)
Programming special functions
^ Press the A button repeatedly until
the option you want appears.
Proceed to step 1.4 if you do not want
to make any other changes to settings
in this programming level.
33