Related Manuals for Uniden XDECT R003
Summary of Contents for Uniden XDECT R003
- Page 1 XDECT R003 Bluetooth ® For more exciting new products please visit our website: Australia: www.uniden.com.au New Zealand: www.uniden.co.nz...
-
Page 2: What's In The Box
If any items are missing or damaged, contact your place of purchase. Never use damaged products! Need Help? Get answers at our website: www.uniden.com.au for Australian model or www.uniden.co.nz for New Zealand model. Important Safety Instructions! When using your telephone equipment, basic safety precautions should always be... -
Page 3: Setting Up Your Handset
Setting Up Your Handset Install the Battery 11 Unpack the handset, battery pack, and battery cover1 If the battery cover is already on the handset, press in on the notch and slide the cover down and off1 Line up the battery pack connector with the jack inside the handset1 (The battery connector only fits one way1) Push the battery pack connector in until it clicks into place1 Tug... -
Page 4: Registering The Handset
Repeater/ charger. You can use the handset normally even if the charger is not registered. Compatible Bases This handset is designed for use with Uniden's XDECT R035BT base1 For the most up-to-date list of compatible bases for this handset, see our website1... -
Page 5: How It Works
Using the Repeater/Charger How it Works The XDECT R003BT repeater/charger extends the range of your base in all directions, including up and down1 Each handset will automatically connect to the repeater/charger or the base, depending on which signal is stronger1 (The handset operates exactly the same way whether it's connected to the base or to the repeater/charger1) Base Coverage Area... - Page 6 Registering the Repeater/charger Registering the Repeater/charger is a separate process from registering the handset. You can use the charger even if the handset is not registered. On the base, press and hold when the phone is in standby1 FIND 21 On the bottom of the repeater/charger, press and hold the registration button until the light starts to...
-
Page 7: Link Light
Picking the best spot The best spot for the repeater/ charger is as far from the base as possible while still maintaining a good signal, or near the edge of the base’s coverage area1 To find the edge of the coverage area: Stand near the base and make a call on the... - Page 8 Wall Mounting the Repeater/charger If you want mount the charger on the wall, you need to adjust the desk stand: Pull the locking tab up and back (see the black arrow in the illustration to the right), and slide the desk stand straight off1 Flip the stand over so the locking tabs that say are facing the...
-
Page 9: Handling Liquid Damage
Important Information Handling Liquid Damage Moisture and liquid can damage your cordless phone1 If the handset or repeater/charger is exposed to moisture or liquid, but only the exterior plastic housing is affected, wipe off the liquid, and use as normal1 If moisture or liquid has entered the plastic housing (i1e1 liquid ... -
Page 10: Battery Information
Using another charger may damage the battery pack or cause the battery pack to explode. Rechargeable Batteries Must Be Recycled or Disposed of Properly. Uniden works to reduce lead content in PVC coated cords in our products & accessories. -
Page 11: One-Year Limited Warranty
Improperly installed, (D) Repaired by someone other than an authorized Uniden Repair Agent for a defect or malfunction covered by this warranty, (E) Used in conjunction with any equipment or parts or as a part of a system not manufactured by Uniden. (F) Only available in the original country of sale. - Page 12 © 2010 Uniden Australia Pty Ltd/Uniden New Zealand Limited Printed in Vietnam UUZZ01233BZ(0)