Functions And Operations; Sw1 Switch On Pk8167 Board - JAI CV-S3200 Operation Manual

4-2. S-VIDEO connector
4-3. LENS connector

5. Functions and operations

5-1. SW1 switch on PK8167 board

This switch is to select the type of auto iris. It is located on the CCD board (PK8167), as below.
Up : Video controlled (Active)
Down : Direct drive mode (Passive)
Note : Factory pre-set is Video controlled.
CV-S3200/3300
1 : Ground
2 : Ground
3 : Y output
4 : C output
1 : +9V / Damp-
2 : NC / Damp+
3 : Iris / Drive+
4 : Ground / Drive-
6
SW1 switch