Table of Contents
Advertisement
5-2-2. Operations
Screen display (example)
(a)
To start adjustment, push the "FUNC" button. The menu will appear on the monitor . (See page 12)
(b)
Use "UP" or "DOWN" buttons to choose functions. To select function, press the "FUNC" button.
(c)
After selecting the function, press "UP" or "DOWN" buttons to choose mode. To select
mode, press the "FUNC" button.
(d)
To use One Push White Balance.
Go to the next function if needed, and repeat (b) to (c).
1. Change to White Balance mode by Function SW.
2. Change to One-push mode by Up or Down SW.
3. Push Function SW and make it READY.
4. Push Up SW, and One-Push White Balance function starts.
5. Push Function SW to save the data (R.B.Gain) of One-Push White Balance.
If you turn off the power without saving the data, it will return to the original status.
5-3. RS 232C functions
a)
White balance
b)
Electronic shutter
c)
Auto gain control
d)
Back light compensation
e)
Iris level
f)
Gamma
g)
Scanning reversal
h)
Frame integration
CV-S3200/3300
Note : This scroll bar will be displayed when the following
functions are selected.
White balance = manual, AGC = manual, Iris = manual
:
To adjust the color temperature
:
To adjust the shutter speed
:
OFF, +12dB, +24dB, manual selectable
:
To create your own BLC pattern.
:
To adjust the video level
:
0.45, 0.60, 1.0 selectable
:
To select the scanning direction
:
To select the sensivity and mode
11
Function buttons for on-screen-menu
Rear panel of CV-S3300 (example)
- Quick Links:
- Specifications
Hide quick links:
Advertisement
Table of Contents
