Maintenance Schedule 1.33; After First 5 Hours; Every 5 Hours Or Daily; Every 25 Hours Or Every Season - Hayter Harrier 48 Owner's Handbook Manual

Electric start/variable speed
Hide thumbs Also See for Harrier 48:
Table of Contents

Advertisement

1.33
MAINTENANCE SCHEDULE
Follow the hourly or calendar intervals, whichever occurs first. More frequent service
will be required if working for prolonged periods under dusty, dry conditions, or when
airborne debris is present or after extensive operation cutting tall, dry grass.

AFTER FIRST 5 HOURS

Change engine oil
Check 5 speed hub adjustment

EVERY 5 HOURS OR DAILY

Check oil level
Remove grass debris from around engine, muffler/muffler guard and air ways in the top
cowl.
Remove grass debris from top and underside of deck housing.
Remove grass debris from the grassbag and check for signs of damage.
Check condition of guards and safety devices.
Check condition of cutterbar.

EVERY 25 HOURS OR EVERY SEASON

Change engine oil if continuously operating under heavy load or high ambient tempera-
ture.
Service the dual element air cleaner - pre cleaner.
Lubricate wheels, pivot points and linkages.
Grease inner control cables at point of entry and exit from their outer casings.
Check clutch cable adjustment.
Check 5 speed hub adjustment.
Sharpen cutterbar.
MAINTENANCE
1.33
488142MT210999A

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

488t

Table of Contents