Page 1
Harrier 48/56 Pro CODES 496 & 566 OWNER’S HANDBOOK Original Version (EN) From Serial No. 313000001 onwards Issue: 12.10.12 Part Number: 3374-356 (A)
The safety precautions listed in this handbook and all other generally recognised regula- tions on safety must be observed at all times. For a full range of products and to locate your nearest authorised sales stockist, service or parts dealer please visit our website at www.hayter.co.uk...
Page 4
SPECIFICATIONS / MAIN FEATURES Code Briggs & Stratton Briggs & Stratton Engine Series 850 Series 850 Engine type 2750 rpm 2750 rpm Unleaded petrol Unleaded petrol Fuel type 1.1 litres 1.1 litres Fuel capacity SAE 30 engine oil SAE 30 engine oil Oil type 0.6 litres 0.6 litres...
- replace all fuel tank and container caps securely. Always replace worn or faulty parts with genuine Hayter parts. Never mow while people, especially children, or pets are Replace faulty silencers.
SAFETY PRECAUTIONS Never store the mower with petrol in the tank within an Operation cont when the engine is hot. If the machine has to be tilted for transportation when spark. crossing surfaces other than grass, and when transporting Stop the engine and disconnect the spark plug lead: the machine to and from the area to be mowed.
Stratton recommend the use of their fuel additive which the following items have been supplied correctly. If any is available from an authorised Briggs & Stratton service items are missing contact, your local Hayter dealer. Prevent Engine Damage dealer. To prevent engine damage the engine is shipped Fill to base of neck to allow for fuel expansion.
OPERATING THE MOWER lever, apply downward pressure on the handlebar to raise Controls Forward Travel the front wheels just above ground level and steer in the Operate all control levers several times and ensure that Hold the handlebar and operate the ground drive clutch required direction.
OPERATING THE MOWER shake the grassbag vigorously to clean the airways. Good Height Of Cut Non Grassed Areas To adjust the height of cut: Grip the lever and pull side- When moving the mower across non-grassed areas, stop grassbag. When collecting grass clippings it is important ways to disengage it from the locking notch, then push the engine and set the mower to the maximum height of that the grassbag is emptied regularly to prevent block-...
MAINTENANCE SCHEDULE - Sharpen the cutterblade. Maintenance Schedule Follow the hourly or calendar intervals, whichever occurs 50 Hours Or Every Season Change the engine oil. prolonged periods under dusty, dry conditions, or when airborne debris is present or after extensive operation 100 Hours Or Every Season cutting tall, dry grass.
We recommended that this service be carried Check the oil level daily before starting the engine and out by an authorised Hayter Service dealer. - Do not use petroleum solvents. ensure that the correct oil level is maintained. Refer to- - Do not use pressurised air.
When the spring is set edges to avoid the risk of injury should the tool slip. tighten the inner lock nut to secure position. (Refer ALWAYS use genuine Hayter replacement parts. The condition of the cutterblade and its mounting 60mm...
MOWER MAINTENANCE through contact with the engine. - Lubricate the mower and treat metal parts with a water Cutterblade Sharpening Engines stored in excess of 30 days need to be protected repellent anti-corrosion product. A slightly worn cutterblade may be re-sharpened. Both with Briggs &...
LAWN CARE CALENDAR To be used as a guide only January June October There is very little work to do this month apart from Summer mowing should now be under way. It should be Rake out the thatch from the turf and spike the lawn to brushing away leaves.
TROUBLE SHOOTING PROBLEM CAUSES CORRECTIVE ACTION PROBLEM CAUSES CORRECTIVE ACTION 1. Engine stop lever released Discharge chute blocks 1. Grass is wet 1. Mow dry grass lever 2. Cut height is too low 2. Increase cut height Engine will not turn 2.
Making a Claim To make a warranty claim, return the unit to a Hayter Authorised Service Dealer along with proof of purchase stating the machine serial number and date of purchase. The service receipt(s) or stamped service card must be produced as proof of entitlement to the extended warranty period. Subject to the conditions and exclusions in this limited warranty, the Au- thorised Service Dealer will, at our option, repair or replace any warranted part within the duration of the warranty period.
Hayter dealer. Your personal information will be processed by Hayter in the UK. It will also be entered into the Toro warranty system, which is hosted on servers located within the United States where privacy law may not provide the same protection as applies in your country.
Page 18
SERVICE RECORD & CUSTOMER INFO Date of Sale:- Engine Type:- Engine:- Hayter Limited Spellbrook, Bishop’s Stortford, Hertfordshire CM23 4BU England Tel: +44 (0)1279 723444 Fax: +44 (0)1279 600338 www.hayter.co.uk 18 20...