Maintenance Schedule - Hayter Harrier 41 Autodrive VS ES IS Operator's Manual

Table of Contents

Advertisement

MAINTENANCE SCHEDULE

Follow the hourly or calendar intervals, whichever occurs fi rst.
More frequent service will be required if working for prolonged periods under dusty,
dry conditions, when airborne debris is present or after extensive operation cutting
tall, dry grass.
First 5 Hours
After the very fi rst fi ve hours change the engine oil.
Check the percentage of charge available in the battery and charge if necessary.
Daily or Each Use
Check the oil level.
Remove grass debris from around the engine, exhaust / exhaust guard, airways
in the top cowl and the underside of the deck housing.
Check the condition of guards and safety devices.
Check condition of cutterblade.
Check condition of grassbag and ensure airways are clear (replace if damaged).
Check the percentage of charge available in the battery and charge if necessary.
25 Hours Or Every Season
Change the engine oil if continuously operating under heavy load or high
ambient temperature.
Service the air fi lter.
Lubricate wheels, pivot points and linkages.
Grease the inner control cables at point of entry and exit from their outer casing.
Check the clutch cable adjustment.
Sharpen the cutterblade.
50 Hours Or Every Season
Change the engine oil.
Clean the air fi lter.
100 Hours Or Every Season
Clean the engine cooling system. Clean more often under dusty conditions or
when airborne debris is present or after prolonged operation whilst cutting tall,
dry grass.
Replace the spark plug.
Replace the air fi lter.
Failure to follow this maintenance schedule could result in non warrantable
failures.
d).
ary.
ing.
24

Advertisement

Table of Contents
loading

This manual is also suitable for:

376b

Table of Contents