Mowing Without Grass Collection; Heavy Growth; Moving The Mower Across Non-Grassed Areas - Hayter Harrier 48 Owner's Handbook Manual

Electric start/variable speed
Hide thumbs Also See for Harrier 48:
Table of Contents

Advertisement

1.21

MOWING WITHOUT GRASS COLLECTION

To mow without collecting the grass clippings, remove the
grassbag and operate the mower with the rear deflector in its
lowest position.
WARNING - PREVENT ACCIDENTS: ALWAYS check
the condition of the rear deflector for signs of damage
and ensure it is positioned correctly on the rear of the
mainframe. Replace a damaged rear deflector immedi-
ately. never operate the mower with a damaged rear
deflector.

HEAVY GROWTH

Areas of heavy growth should be mown without grass col-
lection. If grass collection is required, first mow the area
without grass collection at the maximum height of cut set-
ting. Allow the grass clippings to dry out and then mow the
area at the maximum height of cut setting with the grassbag
fitted. Reduce the height of cut and mow the area again as
necessary until the required finish is obtained.

MOVING THE MOWER ACROSS NON-GRASSED AREAS

Set the mower to its maximum height of cut to protect the
cutting mechanism when moving the mower over surfaces
other than grass.
WARNING - PREVENT ACCIDENTS : ALWAYS stop
the engine and push the mower carefully at slow walking
speed.
OPERATING THE MOWER
1.21
CS029
488142MT210999A

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

488t

Table of Contents