Securing Nuts And Bolts; Lubrication; Clutch Cable Adjustment - Hayter Harrier 48 Owner's Handbook Manual

1.28

SECURING NUTS AND BOLTS

Regularly check that all securing nuts and bolts are tight.
Replace missing or damaged items immediately.

LUBRICATION

Lubricate the wheels, pivot points and linkages with engine
oil every 25 operating hours.
Apply a good quality medium grease to the inner control
cables at the point of entry and exit from their outer casings.

CLUTCH CABLE ADJUSTMENT

Check the clutch cable operation every 25 operating hours
and adjust if necessary. The clutch cable is adjusted cor-
rectly when the belt drive just engages with the clutch lever
positioned 32-38mm (1.1/4" - 1.1/2") from the handlebar.
Unscrew the lock nuts (1) and screw the adjuster (2) in or
out as necessary. Tighten the locknuts (1) when correctly
adjusted.
IMPORTANT - PREVENT DAMAGE: ALWAYS oper-
ate the mower with the clutch cable correctly adjusted.
ALWAYS replace damaged cables.
MAINTENANCE
1.28
CS015
CS022
32-38mm
1.1/4"-1.1/2"
1
2
CS019
488142MT210999A