13: Test Virtual Wall (If Applicable); 14: Test Remote (If Applicable); 15: Replace Faulty Accessories; 16: Pack & Record The Serial Numbers - iRobot Roomba Scheduler Service Manual

Record the 'Power Supply Code'

13: Test Virtual Wall (if applicable)

Test returned Virtual Wall with charged batteries
o Clean Virtual Wall (IR emitter)
o Check power light (if blinking then batteries are low)
o Check Virtual mobility (Fig 4 in
Record the 'Virtual Wall Code'

14: Test Remote (if applicable)

Test returned Remote with charged batteries
o Clean Remote (IR emitter)
o Check power light (if blinking then batteries are low)
o Verify all command buttons function with a Roomba
Record the 'Remote Code'

15: Replace Faulty Accessories

Replace faulty accessories
Record the 'Action Item Code'.
16: Pack & Record the Serial Numbers
Wrap Battery so no electrical contact is made with the Roomba in
order to avoid creating a deeply discharged battery.
Record the serial number of all replacement parts.
Appendix H)
Appendix C
Troubleshoot
Virtual Wall
(pg 43)
Appendix C
Troubleshoot
Remote (pg
44)
Appendix C
Appendix C
Appendix B
11