Table of Contents
Advertisement
3.6.4.1 Boot settings configuration
Item
Quick Boot
Quiet Boot
AddOn ROM Display Mode
Bootup Num-Lock
PS/2 Mouse support
Wait For "F1" If Error
Hit "DEL" Message Display
Interrupt 19 capture
Options
This item allows BIOS to skip certain tests
Disabled,
while booting. This will decrease the time
Enabled
needed to boot the system.
If set to Disabled, the BIOS displays normal
Disabled,
POST messages. If Enabled, an OEM Logo is
Enabled
shown instead of POST messages.
Force BIOS,
This option allows add-on ROM (read-only
Keep Current
memory) messages to be displayed.
On,
This option allows the number Lock setting to
Off
be modified during boot up.
Auto
This interface utilizes a bidirectional serial
Disabled,
protocol to communicate with the computer's
Enabled
auxiliary device controller
Disabled,
When set to enable, the system waits for the
Enabled
F1 key to be pressed when error occurs.
This BIOS feature allows you to control the
Disabled,
display of the Hit "DEL" to enter setup
Enabled
message during memory initialization.
Disabled,
This item allows options for ROMs to trap
Enabled
interrupt 19.
User's Manual
Description
EMX-PNV User's Manual 57
Advertisement
Table of Contents
