Table of Contents
Advertisement
3.6.3
PCIPnp
The settings in this section deal specifically with the PCI bus and Plug and Play (PnP)
settings.
Item
Clear NVRAM
Plug & Play O/S
PCI latency timer
Allocate IRQ to PCI VGA
Palette Snooping
PCI IDE BusMaster
Options
No,
Yes
No,
Yes
32, 64, 96, 128,
160, 192, 224, 248
No,
Yes
Enable/Disable
Enable/Disable
Description
Set this value to force the BIOS clear
Non-volatile Random Access Memory
(NVRAM). The Original and Fail-Safe default
setting is No.
Choose No to let the BIOS configure all
devices in the system. This setting is
appropriate when using a Plug and Play
operating system.
This feature controls how long a PCI device
can hold the PCI bus before another takes
over. It is set to 64 clock cycles.
If this item is enabled, an IRQ will be assigned
to the PCI VGA graphics system. You set this
value to No to free up an IRQ.
This item is designed to solve problems
caused by some non-standard VGA card.
When set to enabled, BIOS uses PCI bus
mastering for reading/writing to IDE drives.
EMX-PNV User's Manual 55
User's Manual
Advertisement
Table of Contents
