Avalue Technology EMX-PNV User Manual page 40

EMX-PNV
3.6.2.2 IDE configuration
Item
ATA/ IDE Configuration
Configure SATA as
Primary/ Secondary/ Third/
Fourth IDE Master
Primary/ Secondary/ Third/
Fourth IDE Slave
Hard Disk Write Protect
IDE Detect Time Out (Sec)
ATA (PI) 80Pin Cable Detection
40 EMX-PNV User's Manual
Options
Disabled,
Compatible,
Enhanced
IDE,
AHCI
Disabled,
Enabled
Disabled,
Enabled
Disabled,
Enabled
0/ 5/ 10/ 15/ 20/ 25/ 30/
35
Host & Device,
Host,
Device
Description
This can be configured as Disabled,
Compatible or Enhanced.
Use this option to configure the SATA port as
an IDE drive or a SATA drive (AHCI mode)
Use the IDE Master and IDE Slave
configuration menu to view both primary and
secondary IDE device details and configure
the IDE devices connected to the system.
Use the IDE Master and IDE Slave
configuration menu to view both primary and
secondary IDE device details and configure
the IDE devices connected to the system.
Disable/ Enable device write protection. This
will effective only if device is accessed through
BIOS.
This allows you to select the time out value for
detecting ATA/ ATAPI devices.
This item allows you to select ATA cable
detection mode.